Chesspartner winboard support

Discussions about Winboard/Xboard. News about engines or programs to use with these GUIs (e.g. tournament managers or adapters) belong in this sub forum.

Moderator: Andres Valverde

Chesspartner winboard support

Postby Daniel Shawul » 15 Feb 2007, 10:04

Does this Gui have also have a bad winboard protocol support?
My operator for cct is having lots of time failures with this gui when
scorpio is installed as a winboard engine. And when i looked at the debug file it seems that scorpio gets non-native commands like "depth" , and also the "time" command is not send properly which is what i think is causing the problem.
Does wb2uci fix the problem? Otherwise i am off to implement kibitz code and use Winboard.
Thanks in advance
Daniel
User avatar
Daniel Shawul
 
Posts: 366
Joined: 28 Sep 2004, 09:33
Location: Ethiopia

Re: Chesspartner winboard support

Postby Robert Allgeuer » 17 Feb 2007, 19:26

I can confirm that Scorpio has problems in ChessPartner, leading to losses in time. I am not sure, whether the ChessPartner implementation of Winboard is buggy, although out of the probably 100 engines I have run so far in ChessPartner only Scorpio, SlowChess and Amyan show this problem.

Robert
Robert Allgeuer
 
Posts: 124
Joined: 28 Sep 2004, 19:09
Location: Konz / Germany

Re: Chesspartner winboard support

Postby Daniel Shawul » 19 Feb 2007, 10:02

Thanks for the confirmation!
I don't know what things scorpio does differently, but i expect that
if it works under Winboard, then it should work on any other gui which supports the protocol correctly. Well for the tournament we used Wb2UCI which fixes the problem. For anyone using scorpio in GUI's other than Winboard and Arena, I recommend to use wb2uci.
regards,
Daniel
User avatar
Daniel Shawul
 
Posts: 366
Joined: 28 Sep 2004, 09:33
Location: Ethiopia

Re: Chesspartner winboard support

Postby Volker Pittlik » 19 Feb 2007, 10:13

Daniel Shawul wrote:...For anyone using scorpio in GUI's other than Winboard and Arena, I recommend to use wb2uci.
...


Thank you too!

BTW: Rolling out the red carpet, fanfare, congratulations!

Volker
User avatar
Volker Pittlik
 
Posts: 1031
Joined: 24 Sep 2004, 10:14
Location: Murten / Morat, Switzerland

Re: Chesspartner winboard support

Postby Daniel Shawul » 19 Feb 2007, 10:35

well we had some luck,but what the hell :):)
The SKILL and NEVER SAY DIE spirit scorpio showed is fantastic.

Daniel
User avatar
Daniel Shawul
 
Posts: 366
Joined: 28 Sep 2004, 09:33
Location: Ethiopia

Re: Chesspartner winboard support

Postby Roger Brown » 19 Feb 2007, 19:52

Daniel Shawul wrote:well we had some luck,but what the hell :):)
The SKILL and NEVER SAY DIE spirit scorpio showed is fantastic.

Daniel




Hello Daniel,

Luck is ever a part of these events but what it showed is the skill of the programmer of Scorpio as well.

:D

I liked where the Baron placed in that field as well but I have not reviewed the games yet.

Later.
Roger Brown
 
Posts: 346
Joined: 24 Sep 2004, 12:31

Re: Chesspartner winboard support

Postby Daniel Shawul » 20 Feb 2007, 09:54

edit: Double post removed
Last edited by Daniel Shawul on 20 Feb 2007, 10:02, edited 1 time in total.
User avatar
Daniel Shawul
 
Posts: 366
Joined: 28 Sep 2004, 09:33
Location: Ethiopia

Re: Chesspartner winboard support

Postby Daniel Shawul » 20 Feb 2007, 10:01

Hello Roger

You do notice a programmer's skill :):)

Seriously though, luck plays the most important role.
I had endgame bugs that could pop up any time(which didn't), and other's like spike's poped up at crucial time. I wouldn't have mind if Spike got the full point, but also i don't feel bad taking the half point:) Scorpio had already made some serious mistakes in the endgame to get to that point.

Anyway it was fun to beat engine's which scorpio had no chance in long tournaments.

regards,
Daniel
User avatar
Daniel Shawul
 
Posts: 366
Joined: 28 Sep 2004, 09:33
Location: Ethiopia

Re: Chesspartner winboard support

Postby Odd Gunnar Malin » 02 Mar 2007, 13:26

I'm not familiar with the engine in question but Chesspartner have very configurable interface for Winboardengines (http://www.lokasoft.com/engineext.ini_file_layout). Most defaults are ok with the exeption of this depth command. The time command should be sent before each move as default, but the user could have changed this.
I have not tested wb2uci with Chesspartner much, but at least in analysis mode there are (was) problems.
There was some writing/problem about timemanagement (eg. timestamp.exe) on ICC a while back, was he running the latest gui (5.4).
Odd Gunnar Malin
 
Posts: 9
Joined: 29 Sep 2004, 08:10
Location: Vads?, Norway

Re: Chesspartner winboard support

Postby ShaunBrewer » 17 Mar 2007, 00:25

I tried to get Scorpio working under CP a while back but failed

if anyone has this working please either post here or on the CP forum.

Here is the link to the lokasoft forum where I raised this problem

http://www.lokasoft.nl/forums?func=view ... =2065#2065

Shaun
Checkout CCRL Blitz 40/4 at: http://www.computerchess.org.uk/ccrl/404/
ShaunBrewer
 
Posts: 42
Joined: 09 Apr 2005, 21:08
Location: Brighton - UK


Return to Winboard and related Topics

Who is online

Users browsing this forum: No registered users and 27 guests