Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Discussions about Winboard/Xboard. News about engines or programs to use with these GUIs (e.g. tournament managers or adapters) belong in this sub forum.

Moderator: Andres Valverde

Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Olivier Deville » 24 May 2007, 13:27

Hi all

It seems that the x64 compiles (both AMD64 and EM64T) by Bryan don't load egbb. The x32 compile does.

I have all 5 men in my egbb folder and the last version of the dll. The egbb folder is on the C drive.

The path is set as c:\egbb\ (c:\egbb won't work).

I tried to put the egbb folder inside the Scorpio folder and set the path to ./egbb/ but it did not help.

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France

Re: Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Teemu Pudas » 24 May 2007, 16:28

The dll is 32-bit and hence cannot be loaded by a 64-bit program.
Teemu Pudas
 
Posts: 124
Joined: 16 Apr 2007, 14:03

Re: Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Olivier Deville » 24 May 2007, 16:44

Teemu Pudas wrote:The dll is 32-bit and hence cannot be loaded by a 64-bit program.


Hi Teemu

Many thanks for the information. If Daniel is reading, please tell me if you prefer the x32 version with egbb or the x64 version without egbb at ChessWar.

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France

Re: Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Tony Thomas » 24 May 2007, 16:56

As far as I know, Scorpio isnt a bitboard program, so the speed gain should be minimal.
What more can I say?
Tony Thomas
 
Posts: 232
Joined: 14 May 2006, 19:13
Location: Atlanta, Ga

Re: Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Bryan Hofmann » 24 May 2007, 23:46

Olivier Deville wrote:Hi all

It seems that the x64 compiles (both AMD64 and EM64T) by Bryan don't load egbb. The x32 compile does.

I have all 5 men in my egbb folder and the last version of the dll. The egbb folder is on the C drive.

The path is set as c:\egbb\ (c:\egbb won't work).

I tried to put the egbb folder inside the Scorpio folder and set the path to ./egbb/ but it did not help.

Olivier


Hello Olivier

Both Teemu and Tony are correct. Since the egbb.dll is 32bit it can not be loaded by the 64bit compile. I create a 64bit compile for engines that do show improvement over the 32 bit in speed. If they are not Bit Board then the speed increase is almost always less then 10%. So why do I bother creating a 64 bit compile with such a small increase ... There is always a deman for it, and if a 64bit compile is not on my site I get several emails asking for one.


Bryan
Bryan Hofmann
 
Posts: 98
Joined: 02 Oct 2004, 20:26
Location: USA

Re: Scorpio 1.9.1_x64 compiled by Bryan Hofmann and egbb

Postby Olivier Deville » 25 May 2007, 04:34

Bryan Hofmann wrote:
Olivier Deville wrote:Hi all

It seems that the x64 compiles (both AMD64 and EM64T) by Bryan don't load egbb. The x32 compile does.

I have all 5 men in my egbb folder and the last version of the dll. The egbb folder is on the C drive.

The path is set as c:\egbb\ (c:\egbb won't work).

I tried to put the egbb folder inside the Scorpio folder and set the path to ./egbb/ but it did not help.

Olivier


Hello Olivier

Both Teemu and Tony are correct. Since the egbb.dll is 32bit it can not be loaded by the 64bit compile. I create a 64bit compile for engines that do show improvement over the 32 bit in speed. If they are not Bit Board then the speed increase is almost always less then 10%. So why do I bother creating a 64 bit compile with such a small increase ... There is always a deman for it, and if a 64bit compile is not on my site I get several emails asking for one.


Bryan


Hi Bryan (and thanks Tony for your comment)

A first test seems to show that the x32 version with egbb scores better than the x64 version without egbb. More testing needed though.

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France


Return to Winboard and related Topics

Who is online

Users browsing this forum: No registered users and 22 guests