Looking for somebody who likes to make a logo for my engine.

Discussions about Winboard/Xboard. News about engines or programs to use with these GUIs (e.g. tournament managers or adapters) belong in this sub forum.

Moderator: Andres Valverde

Looking for somebody who likes to make a logo for my engine.

Postby Fermin Serrano » 16 Jun 2008, 07:44

Looking for somebody who likes to make a logo for my engine.
I am very bad at graphics and design, so hoping a help....
Send me a private message.
thx,
User avatar
Fermin Serrano
 
Posts: 72
Joined: 10 Apr 2008, 18:20
Location: Madrid (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Robindu Guha » 16 Jun 2008, 11:50

Umm,

I thought i will write in too :)

if anyone could make me a good logo for my engine<oxygen>,i'd love it!

& Also thanks to Dany for the one i am using for now ;-)
Best,
Robindu
User avatar
Robindu Guha
 
Posts: 7
Joined: 25 May 2008, 12:14
Location: India

Re: Looking for somebody who likes to make a logo for my eng

Postby Jim Ablett » 16 Jun 2008, 17:08

Robindu Guha wrote:Umm,

I thought i will write in too :)

if anyone could make me a good logo for my engine<oxygen>,i'd love it!

& Also thanks to Dany for the one i am using for now ;-)



Image

Jim.
___________________________
http://jimablett.net63.net/
Jim Ablett
 
Posts: 721
Joined: 27 Sep 2004, 10:39
Location: Essex, England

Re: Looking for somebody who likes to make a logo for my eng

Postby Olivier Deville » 16 Jun 2008, 19:50

Fermin Serrano wrote:Looking for somebody who likes to make a logo for my engine.
I am very bad at graphics and design, so hoping a help....
Send me a private message.
thx,


Hola Fermin :)

We have several skilled logo designers on this forum. May I ask how will your engine be called ?

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France

Re: Looking for somebody who likes to make a logo for my eng

Postby Dr.Wael Deeb » 16 Jun 2008, 20:26

Olivier Deville wrote:
Fermin Serrano wrote:Looking for somebody who likes to make a logo for my engine.
I am very bad at graphics and design, so hoping a help....
Send me a private message.
thx,


Hola Fermin :)

We have several skilled logo designers on this forum. May I ask how will your engine be called ?

Olivier


Definitely the case Oliver,I went to his site to see what is the engine we are talking about :D
Time is the greatest teacher,but unfortunately it kills all it's students sooner or later.
Dr.Wael Deeb
 
Posts: 82
Joined: 03 Jun 2008, 11:33
Location: Amman,Jordan

Re: Looking for somebody who likes to make a logo for my eng

Postby Pedro Castro » 16 Jun 2008, 21:49

Engine: Keops ?

http://clonfsp.wordpress.com/2008/03/10 ... e-ajedrez/

The first version is based on TSCP, the second is a complete rewrite based on bitboard.
Best wishes,

Pedro Castro
User avatar
Pedro Castro
 
Posts: 180
Joined: 28 Jan 2005, 01:09
Location: Pays Basque (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Dr.Wael Deeb » 16 Jun 2008, 21:52

Pedro Castro wrote:Engine: Keops ?

http://clonfsp.wordpress.com/2008/03/10 ... e-ajedrez/

The first version is based on TSCP, the second is a complete rewrite based on bitboard.


Thanks Pedro for the info....
Time is the greatest teacher,but unfortunately it kills all it's students sooner or later.
Dr.Wael Deeb
 
Posts: 82
Joined: 03 Jun 2008, 11:33
Location: Amman,Jordan

Re: Looking for somebody who likes to make a logo for my eng

Postby Fermin Serrano » 16 Jun 2008, 21:55

Pedro Castro wrote:Engine: Keops ?

http://clonfsp.wordpress.com/2008/03/10 ... e-ajedrez/

The first version is based on TSCP, the second is a complete rewrite based on bitboard.


upps... I can't not use keops because there is an engine called cheops. I will choose other name.I will notify when released .... I am doing now lots of test
User avatar
Fermin Serrano
 
Posts: 72
Joined: 10 Apr 2008, 18:20
Location: Madrid (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Dr.Wael Deeb » 16 Jun 2008, 22:18

Fermin Serrano wrote:
Pedro Castro wrote:Engine: Keops ?

http://clonfsp.wordpress.com/2008/03/10 ... e-ajedrez/

The first version is based on TSCP, the second is a complete rewrite based on bitboard.


upps... I can't not use keops because there is an engine called cheops. I will choose other name.I will notify when released .... I am doing now lots of test


Thanks Fermin,we'll wait,take your time :D
Time is the greatest teacher,but unfortunately it kills all it's students sooner or later.
Dr.Wael Deeb
 
Posts: 82
Joined: 03 Jun 2008, 11:33
Location: Amman,Jordan

Re: Looking for somebody who likes to make a logo for my eng

Postby Tony Thomas » 17 Jun 2008, 07:07

Dr.Wael Deeb wrote:
Fermin Serrano wrote:
Pedro Castro wrote:Engine: Keops ?

http://clonfsp.wordpress.com/2008/03/10 ... e-ajedrez/

The first version is based on TSCP, the second is a complete rewrite based on bitboard.


upps... I can't not use keops because there is an engine called cheops. I will choose other name.I will notify when released .... I am doing now lots of test


Thanks Fermin,we'll wait,take your time :D


Take your time, but hurry up..
What more can I say?
Tony Thomas
 
Posts: 232
Joined: 14 May 2006, 19:13
Location: Atlanta, Ga

Re: Looking for somebody who likes to make a logo for my eng

Postby Robindu Guha » 17 Jun 2008, 09:31

Jim Ablett wrote:
Robindu Guha wrote:Umm,

I thought i will write in too :)

if anyone could make me a good logo for my engine<oxygen>,i'd love it!

& Also thanks to Dany for the one i am using for now ;-)



Image

Jim.


Thanks Jim!

Wonderful Logo :-D
Best,
Robindu
User avatar
Robindu Guha
 
Posts: 7
Joined: 25 May 2008, 12:14
Location: India

Re: Looking for somebody who likes to make a logo for my eng

Postby Fermin Serrano » 19 Jun 2008, 20:48

I have choose 'Rodin' as the new name.
I would be grateful for a few logos.
best regards,
FS
User avatar
Fermin Serrano
 
Posts: 72
Joined: 10 Apr 2008, 18:20
Location: Madrid (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Jim Ablett » 19 Jun 2008, 22:48

Fermin Serrano wrote:I have choose 'Rodin' as the new name.
I would be grateful for a few logos.
best regards,
FS


Image

Jim.
___________________________
http://jimablett.net63.net/
Jim Ablett
 
Posts: 721
Joined: 27 Sep 2004, 10:39
Location: Essex, England

Re: Looking for somebody who likes to make a logo for my eng

Postby Fermin Serrano » 20 Jun 2008, 13:02

Hi Jim
Nice logo. thx
User avatar
Fermin Serrano
 
Posts: 72
Joined: 10 Apr 2008, 18:20
Location: Madrid (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Graham Banks » 20 Jun 2008, 23:10

Image

Image
User avatar
Graham Banks
 
Posts: 2537
Joined: 26 Sep 2004, 20:37
Location: Auckland, NZ

Re: Looking for somebody who likes to make a logo for my eng

Postby Olivier Deville » 21 Jun 2008, 06:09

Fermin Serrano wrote:I have choose 'Rodin' as the new name.
I would be grateful for a few logos.
best regards,
FS


And what about a logo including the famous Thinker ?

Before somebody asks, french laws allow to use this image, I already checked it for other matters.

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France

Re: Looking for somebody who likes to make a logo for my eng

Postby Jim Ablett » 21 Jun 2008, 09:41

Olivier Deville wrote:
Fermin Serrano wrote:I have choose 'Rodin' as the new name.
I would be grateful for a few logos.
best regards,
FS


And what about a logo including the famous Thinker ?

Before somebody asks, french laws allow to use this image, I already checked it for other matters.

Olivier


Hi Olivier,

Maybe Fermin wanted/expected some 'The Thinker' themed logos, but as
this has been done with Lance Perkin's Thinker engine, I though it best to try something else.

Jim.
___________________________
http://jimablett.net63.net/
Jim Ablett
 
Posts: 721
Joined: 27 Sep 2004, 10:39
Location: Essex, England

Re: Looking for somebody who likes to make a logo for my eng

Postby Fermin Serrano » 21 Jun 2008, 09:47

Olivier Deville wrote:And what about a logo including the famous Thinker ?


Hi!!, I was thinking in a logo about it. In fact I chose 'Rodin' thinking in "Le Penseur"..... is like a king of union bethween art and reason.

thx.
User avatar
Fermin Serrano
 
Posts: 72
Joined: 10 Apr 2008, 18:20
Location: Madrid (Spain)

Re: Looking for somebody who likes to make a logo for my eng

Postby Jim Ablett » 21 Jun 2008, 11:16

Fermin Serrano wrote:
Olivier Deville wrote:And what about a logo including the famous Thinker ?


Hi!!, I was thinking in a logo about it. In fact I chose 'Rodin' thinking in "Le Penseur"..... is like a king of union bethween art and reason.

thx.


Image

Jim.
___________________________
http://jimablett.net63.net/
Jim Ablett
 
Posts: 721
Joined: 27 Sep 2004, 10:39
Location: Essex, England

Re: Looking for somebody who likes to make a logo for my eng

Postby Olivier Deville » 21 Jun 2008, 12:10

Jim Ablett wrote:
Fermin Serrano wrote:
Olivier Deville wrote:And what about a logo including the famous Thinker ?


Hi!!, I was thinking in a logo about it. In fact I chose 'Rodin' thinking in "Le Penseur"..... is like a king of union bethween art and reason.

thx.


Image

Jim.


@Fermin if you like this one, I'll add it to your profile :)

Olivier
User avatar
Olivier Deville
 
Posts: 1176
Joined: 26 Sep 2004, 19:54
Location: Aurec, France

Next

Return to Winboard and related Topics

Who is online

Users browsing this forum: No registered users and 26 guests