WildCat 6 (CCT blitz 2005) is available

Discussions about Winboard/Xboard. News about engines or programs to use with these GUIs (e.g. tournament managers or adapters) belong in this sub forum.

Moderator: Andres Valverde

WildCat 6 (CCT blitz 2005) is available

Postby Igor Korshunov » 23 Oct 2005, 06:13

Hi there!

WildCat 6, that was participated at CCT blitz 2005 is available for download at www.igorkorshunov.narod.ru/WildCat/
Seems it is improved a little at longer controls.

Best wishes,
Igor
Igor Korshunov
 
Posts: 15
Joined: 17 Dec 2004, 11:14

Re: WildCat 6 (CCT blitz 2005) is available

Postby Graham Banks » 23 Oct 2005, 09:20

Thanks Igor :D

Regards, Graham.
User avatar
Graham Banks
 
Posts: 2537
Joined: 26 Sep 2004, 20:37
Location: Auckland, NZ

Re: WildCat 6 (CCT blitz 2005) is available

Postby Arnaud Lohéac » 23 Oct 2005, 15:25

Hi Igor,

Thank you for this release.

WildCat 6.0 will play in the ACCC 1st edition, League Karpov

BUT, I'm unable to download both book files. I got a CRC error.

Anyone who succeeded to download the books ?

Please send it to me here :

aloheac at club-internet.fr

Thanks for all.

Arnaud Loh?ac
Arnaud Lohéac
 
Posts: 22
Joined: 08 Oct 2004, 17:57
Location: Vannes, FRANCE

Re: WildCat 6 (CCT blitz 2005) is available

Postby Graham Banks » 23 Oct 2005, 20:05

Hi Arnaud,

I will email you the Style book, but the email address you posted doesn't seem to work.
Send me an email so I can reply to the correct address.

Regards, Graham.
User avatar
Graham Banks
 
Posts: 2537
Joined: 26 Sep 2004, 20:37
Location: Auckland, NZ

Re: WildCat 6 (CCT blitz 2005) is available

Postby Gábor Szots » 23 Oct 2005, 20:44

Graham Banks wrote:Hi Arnaud,

I will email you the Style book, but the email address you posted doesn't seem to work.
Send me an email so I can reply to the correct address.

Regards, Graham.


Replace "at" with @.

I committed the same error, I copied and pasted the address blindly. I don't think Arnaud has received my e-mail. :-)
Now it's your turn. :-)

G?bor
Gábor Szőts

CCRL testing group
User avatar
Gábor Szots
 
Posts: 327
Joined: 26 Sep 2004, 21:26
Location: Szentendre, Hungary

Re: WildCat 6 (CCT blitz 2005) is available

Postby Graham Banks » 23 Oct 2005, 21:54

Thanks Gabor,

yes I committed the same error - not replacing "at" with "@"
I'm sending the book to him now, so hopefully I'll have better luck than you did! :wink:

Regards, Graham.
User avatar
Graham Banks
 
Posts: 2537
Joined: 26 Sep 2004, 20:37
Location: Auckland, NZ

Re: WildCat 6 (CCT blitz 2005) is available

Postby Arnaud Lohéac » 23 Oct 2005, 22:04

Hi,

I wish to thank the "G" Connection (Gabor and Graham) for sending me the requested file !

Best regards.

Arnaud Loh?ac
Arnaud Lohéac
 
Posts: 22
Joined: 08 Oct 2004, 17:57
Location: Vannes, FRANCE

download blues

Postby mike schoonover » 25 Oct 2005, 12:27

hi all,
i'm having problems downloading from wildcats site.
could someone mail me the exicutable and style book at
axamate@yahoo.com ?
help appreciated.
regards
mike
by the time i get there,i'll be there
mike schoonover
 
Posts: 154
Joined: 27 Sep 2004, 23:15
Location: st paul minnesota,usa

Re: WildCat 6 (CCT blitz 2005) is available

Postby Arnaud Lohéac » 25 Oct 2005, 15:24

Hi Skoony,

check your email box.

Regards.

Arnaud Loh?ac
Arnaud Lohéac
 
Posts: 22
Joined: 08 Oct 2004, 17:57
Location: Vannes, FRANCE

thanks

Postby mike schoonover » 25 Oct 2005, 15:42

regards
mike
by the time i get there,i'll be there
mike schoonover
 
Posts: 154
Joined: 27 Sep 2004, 23:15
Location: st paul minnesota,usa

Re: WildCat 6 (CCT blitz 2005) is available

Postby Norm Pollock » 26 Oct 2005, 18:39

Hi Igor,

My problem with WildCat is that it accesses the 5man tablebases SO MUCH! I sometimes think it is going to break my hard drive. No other engine I use makes so many tablebase hits.

Otherwise, I like the engine very much. Thank you.

-Norm
Norm Pollock
 
Posts: 217
Joined: 27 Sep 2004, 02:52

Re: WildCat 6 (CCT blitz 2005) is available

Postby Igor Korshunov » 26 Oct 2005, 19:01

Hi Norm!

WildCat uses egtb everywhere possible. And don't store it in hash.
May be this is the problem.

I just have not 5-piece egtb and can't see how WildCat works with it.

Best wishes,
Igor
Igor Korshunov
 
Posts: 15
Joined: 17 Dec 2004, 11:14

Re: WildCat 6 (CCT blitz 2005) is available

Postby Gábor Szots » 26 Oct 2005, 20:57

Norm Pollock wrote:Hi Igor,

My problem with WildCat is that it accesses the 5man tablebases SO MUCH! I sometimes think it is going to break my hard drive. No other engine I use makes so many tablebase hits.

Otherwise, I like the engine very much. Thank you.

-Norm


Hi Norm,

Have you ever tried AnMon?

G?bor
Gábor Szőts

CCRL testing group
User avatar
Gábor Szots
 
Posts: 327
Joined: 26 Sep 2004, 21:26
Location: Szentendre, Hungary

Re: WildCat 6 (CCT blitz 2005) is available

Postby Norm Pollock » 27 Oct 2005, 00:30

G?bor Szots wrote:
Norm Pollock wrote:Hi Igor,

My problem with WildCat is that it accesses the 5man tablebases SO MUCH! I sometimes think it is going to break my hard drive. No other engine I use makes so many tablebase hits.

Otherwise, I like the engine very much. Thank you.

-Norm


Hi Norm,

Have you ever tried AnMon?

G?bor


Hi Gabor,

AnMon and WildCat both start using the 5-man tbs very early. With 5 minute blitz they start accessing with about 14 pieces on the board. With 2 minute blitz they start accessing with about 10 pieces on the board. I would hate to play a long time control game between AnMon and WildCat because it would kill the hard drive.

What I have now done is limit those 2 engines to 4-man tbs, which I can do if I use their wb versions in the fritz8 gui. I set the ini file tb setting to the folder in my machine that only has the 4-man tbs, and I keep the 5-man tbs in another folder. It seems to work.

Any other engines that are also tb gluttons?

-Norm
Norm Pollock
 
Posts: 217
Joined: 27 Sep 2004, 02:52

Re: WildCat 6 (CCT blitz 2005) is available

Postby Gábor Szots » 27 Oct 2005, 07:04

Norm Pollock wrote:AnMon and WildCat both start using the 5-man tbs very early. With 5 minute blitz they start accessing with about 14 pieces on the board. With 2 minute blitz they start accessing with about 10 pieces on the board. I would hate to play a long time control game between AnMon and WildCat because it would kill the hard drive.

What I have now done is limit those 2 engines to 4-man tbs, which I can do if I use their wb versions in the fritz8 gui. I set the ini file tb setting to the folder in my machine that only has the 4-man tbs, and I keep the 5-man tbs in another folder. It seems to work.

Any other engines that are also tb gluttons?

-Norm


This is a good idea. I watched several of their games in horror hearing that never ending scratching of the hard disc.

At the moment I can't recall any other killer engines.

No, Pepito is just tearing my HD into pieces. Also Yace.

G?bor
Gábor Szőts

CCRL testing group
User avatar
Gábor Szots
 
Posts: 327
Joined: 26 Sep 2004, 21:26
Location: Szentendre, Hungary

Re: WildCat 6 (CCT blitz 2005) is available

Postby Norm Pollock » 27 Oct 2005, 15:14

G?bor Szots wrote:
Norm Pollock wrote:AnMon and WildCat both start using the 5-man tbs very early. With 5 minute blitz they start accessing with about 14 pieces on the board. With 2 minute blitz they start accessing with about 10 pieces on the board. I would hate to play a long time control game between AnMon and WildCat because it would kill the hard drive.

What I have now done is limit those 2 engines to 4-man tbs, which I can do if I use their wb versions in the fritz8 gui. I set the ini file tb setting to the folder in my machine that only has the 4-man tbs, and I keep the 5-man tbs in another folder. It seems to work.

Any other engines that are also tb gluttons?

-Norm


This is a good idea. I watched several of their games in horror hearing that never ending scratching of the hard disc.

At the moment I can't recall any other killer engines.

No, Pepito is just tearing my HD into pieces. Also Yace.

G?bor


So this is where I stand relative to this problem. Anmon, Wildcat, Yace and Pepito are now limited to 4-man tbs on my machine. Other tb-ready engines use 5-man tbs.

I do a couple of other things based in part on this problem. I use a "small" 30G second hard drive for the chess engines and tbs. My c: is an 80G. At least if the chess drive goes, I still have my system.

I also backup (to CD) my chess folders other than the tb folders. The tb folders have to backed up separately and they require many CDs for backup.

-Norm
Norm Pollock
 
Posts: 217
Joined: 27 Sep 2004, 02:52

Re: WildCat 6 (CCT blitz 2005) is available

Postby Gábor Szots » 27 Oct 2005, 16:33

So this is where I stand relative to this problem. Anmon, Wildcat, Yace and Pepito are now limited to 4-man tbs on my machine. Other tb-ready engines use 5-man tbs.

I do a couple of other things based in part on this problem. I use a "small" 30G second hard drive for the chess engines and tbs. My c: is an 80G. At least if the chess drive goes, I still have my system.

I also backup (to CD) my chess folders other than the tb folders. The tb folders have to backed up separately and they require many CDs for backup.

-Norm[/quote]

I have done the same. This separate drive is also a good idea, unfortunately I have only one HD installed. I have also backed up the important things. If my HD ever goes astray I am not going to use 5-man EGTB's any more, at least not all of them, which I do now. There is a new opinion spreading that they are of not much benefit anyway.

G?bor
Gábor Szőts

CCRL testing group
User avatar
Gábor Szots
 
Posts: 327
Joined: 26 Sep 2004, 21:26
Location: Szentendre, Hungary


Return to Winboard and related Topics

Who is online

Users browsing this forum: No registered users and 9 guests