Danchess taken out suspected clone of ...

[Daniel]

Geschrieben von: / Posted by: Daniel at 28 January 2004 15:02:35:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.



DanChess

[Jose Carlos]

Geschrieben von: / Posted by: Jose Carlos at 28 January 2004 15:46:25:
Als Antwort auf: / In reply to: Danchess taken out suspected clone of ... geschrieben von: / posted by: Daniel at 28 January 2004 15:02:35:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

[Jose Carlos]

Geschrieben von: / Posted by: Jose Carlos at 28 January 2004 15:49:31:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Jose Carlos at 28 January 2004 15:46:25:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I forgot to ask: who has accused Danchess of being a clone? Has there been a discussion about that somewhere (I can't find it in CCC)? What has exactly happend?
José C.

[Daniel]

Geschrieben von: / Posted by: Daniel at 28 January 2004 15:58:32:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Jose Carlos at 28 January 2004 15:46:25:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

[Tom Likens]

Geschrieben von: / Posted by: Tom Likens at 28 January 2004 16:09:02:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Daniel at 28 January 2004 15:58:32:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust??

[Tom Likens]

Geschrieben von: / Posted by: Tom Likens at 28 January 2004 16:17:17:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Tom Likens at 28 January 2004 16:09:02:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dann, who can ya trust??

Heck, he might even improve the program!!
--tom

[Jose Carlos]

Geschrieben von: / Posted by: Jose Carlos at 28 January 2004 16:28:04:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Daniel at 28 January 2004 15:58:32:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Daniel, what has happened exactly? Who has accused you of what? With what proof? Who has made the final decision?
José C.

[Daniel]

Geschrieben von: / Posted by: Daniel at 28 January 2004 16:40:04:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Tom Likens at 28 January 2004 16:09:02:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust??

thanks for your help though i don't need yours(it is so weak ).
source is sent(already in your mailbox ,dann).
It is up to him to decide.

[Will Singleton]

Geschrieben von: / Posted by: Will Singleton at 28 January 2004 16:49:53:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Daniel at 28 January 2004 16:40:04:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust?? src=http://bilder.parsimony.net/smilies/zwinker.gif alt=zwinker>

thanks for your help though i don't need yours(it is so weak ).

That's not only untrue, but really rude. I think an apology is in order.
Will

[daniel]

Geschrieben von: / Posted by: daniel at 28 January 2004 16:54:48:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Will Singleton at 28 January 2004 16:49:53:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust?? >src=http://bilder.parsimony.net/smilies/zwinker.gif alt=zwinker>

thanks for your help though i don't need yours(it is so weak ).

That's not only untrue, but really rude. I think an apology is in order.
Will

i think anybody will say worse if he is in my position.
Just read what he said before.

[Tom Likens]

Geschrieben von: / Posted by: Tom Likens at 28 January 2004 17:29:03:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Daniel at 28 January 2004 16:40:04:

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust??

thanks for your help though i don't need yours(it is so weak ).

Ouch, that's gonna leave a mark!
regards,
--tom

[Tom Likens]

Geschrieben von: / Posted by: Tom Likens at 29 January 2004 00:35:25:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: daniel at 28 January 2004 16:54:48:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust?? >>src=http://bilder.parsimony.net/smilies/zwinker.gif alt=zwinker>

thanks for your help though i don't need yours(it is so weak ).

That's not only untrue, but really rude. I think an apology is in order.
Will

i think anybody will say worse if he is in my position.
Just read what he said before.

Ah, I see the confusion. I left out an 'n'. The P.S. was referring to "Dann Corbit".
It was never my intention to insult you, (just a bad coincidence that I did).
regards,
--tom

[U.Tuerke]

Geschrieben von: / Posted by: U.Tuerke at 30 January 2004 08:10:52:
Als Antwort auf: / In reply to: Re: Danchess taken out suspected clone of ... geschrieben von: / posted by: Tom Likens at 29 January 2004 00:35:25:

....crafty,what else?
It is bitboard based,outputs like crafty does and it improves a lot
so what else could it be other than a clone.Well I am asked to submit
code to Dann corbit.well,I can't do it all alone.I need 10 other engines(not
open source) to go with me. Any body willing please post back here.
regards
Daniel
P.S: shouldn't one come with proof when blaming some one.

I've sent my source code to Dann many times and will do any time it's required. Dann will surely not reveal anything from your code. I put my money on it.
José C.

I am sure he won't. and ofcourse the code is not worth it.
I am just looking for some people who has a bitboard based engine
(not open source) and willing to send the source to Dann with me.
It seems that nobody is willing so far. If i find none,I will send it
my code to him.

Djinn is bitboard (bitmapped) based *and* I'd be willing to send its source code to Dann.
I only wish Djinn was good enough that everyone thought it was a Crafty clone!!
regards,
--tom
P.S. If ya can't trust Dan, who can ya trust?? >>>src=http://bilder.parsimony.net/smilies/zwinker.gif alt=zwinker>

thanks for your help though i don't need yours(it is so weak ).

That's not only untrue, but really rude. I think an apology is in order.
Will

i think anybody will say worse if he is in my position.
Just read what he said before.

Ah, I see the confusion. I left out an 'n'. The P.S. was referring to "Dann Corbit".
It was never my intention to insult you, (just a bad coincidence that I did).
regards,
--tom

I guess that most of us had understood you correctly.
Perhaps, Dan is currently a bit "over-sensitive" because of the accusation.
Uli