Apparently my random is not random at all. I used
(rand() & 0xFFFF)*NrOfMoves >> 16
Apparently this is not an uncorrelated random at all. I will now try
rand() % NrOfMoves
Moderator: Andres Valverde
(rand() & 0xFFFF)*NrOfMoves >> 16
rand() % NrOfMoves
H.G.Muller wrote:OK, I give up. I tried 20 different ways, but there is no way I can get a sequence of numbers out of rand() that look anything like random. Even if I interspace it with ~about a million other calls to rand().
So forget about my results with the random mover, I cannot make one.
Nevertheless, it seems strange that with me POS seemed to have so much difficulty in winning against a bare King. For no matter how non-random Ram 0.0 played, it almost always ended up against POS with a bare King, and POS with lots of material.
But it might be of course, that against truly random play, POS ends up wit, say, on the average 50% more material as it did in my case, and that this makes all the difference between mating within 50 moves with 95% probability or with only 50% probability.
Or it might be that the tendency to do consecutive moves with the same piece enhanced the 3-fold repetition probability.
Are you sure that POS claims adequately on 50-move and rep-draw?
Anyway, I would worry about the fact that PS moves predominantly its King, and towards the center. That is of more practical interest then how random you have to move to let POS win.
/*
A C-program for MT19937, with initialization improved 2002/2/10.
Coded by Takuji Nishimura and Makoto Matsumoto.
This is a faster version by taking Shawn Cokus's optimization,
Matthe Bellew's simplification, Isaku Wada's real version.
Before using, initialize the state by using init_genrand(seed)
or init_by_array(init_key, key_length).
Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The names of its contributors may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Any feedback is very welcome.
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/emt.html
email: m-mat @ math.sci.hiroshima-u.ac.jp (remove space)
*/
#include <string.h>
class MersenneTwister {
#define ARRAY_DIM 624
private:
unsigned long state[ARRAY_DIM];
int left;
int initf;
unsigned long *next;
void next_state(void) {
unsigned long *p = state;
int j;
if (initf == 0)
init_genrand(5489UL);
left = ARRAY_DIM;
next = state;
for (j = ARRAY_DIM - 397 + 1; --j; p++)
*p = p[397] ^ (((((p[0]) & 0x80000000UL) | ((p[1]) & 0x7fffffffUL)) >> 1) ^ ((p[1]) & 1UL ? 0x9908b0dfUL : 0UL));
for (j = 397; --j; p++)
*p = p[397 - ARRAY_DIM] ^ (((((p[0]) & 0x80000000UL) | ((p[1]) & 0x7fffffffUL)) >> 1) ^ ((p[1]) & 1UL ? 0x9908b0dfUL : 0UL));
*p = p[397 - ARRAY_DIM] ^ (((((p[0]) & 0x80000000UL) | ((state[0]) & 0x7fffffffUL)) >> 1) ^ ((state[0]) & 1UL ? 0x9908b0dfUL : 0UL));
}
public:
MersenneTwister() {
memset(state, 0, sizeof state);
left = 1;
initf = 0;
next = 0;
unsigned long init[4] = {0x123, 0x234, 0x345, 0x456};
init_by_array(init, 4);
}
/* initializes state[N] with a seed */
void init_genrand(unsigned long s) {
int j;
state[0] = s & 0xffffffffUL;
for (j = 1; j < ARRAY_DIM; j++) {
state[j] = (1812433253UL * (state[j - 1] ^ (state[j - 1] >> 30)) + j);
state[j] &= 0xffffffffUL;
}
left = 1;
initf = 1;
}
/* initialize by an array with array-length */
/* init_key is the array for initializing keys */
/* key_length is its length */
/* slight change for C++, 2004/2/26 */
void init_by_array(unsigned long init_key[], int key_length) {
int i,
j,
k;
init_genrand(19650218UL);
i = 1;
j = 0;
k = (ARRAY_DIM > key_length ? ARRAY_DIM : key_length);
for (; k; k--) {
state[i] = (state[i] ^ ((state[i - 1] ^ (state[i - 1] >> 30)) * 1664525UL)) + init_key[j] + j;
state[i] &= 0xffffffffUL;
i++;
j++;
if (i >= ARRAY_DIM) {
state[0] = state[ARRAY_DIM - 1];
i = 1;
}
if (j >= key_length)
j = 0;
}
for (k = ARRAY_DIM - 1; k; k--) {
state[i] = (state[i] ^ ((state[i - 1] ^ (state[i - 1] >> 30)) * 1566083941UL)) - i;
state[i] &= 0xffffffffUL;
i++;
if (i >= ARRAY_DIM) {
state[0] = state[ARRAY_DIM - 1];
i = 1;
}
}
state[0] = 0x80000000UL;
left = 1;
initf = 1;
}
/* generates a random number on [0,0xffffffff]-interval */
unsigned long genrand_int32(void) {
unsigned long y;
if (--left == 0)
next_state();
y = *next++;
y ^= (y >> 11);
y ^= (y << 7) & 0x9d2c5680UL;
y ^= (y << 15) & 0xefc60000UL;
y ^= (y >> 18);
return y;
}
};
extern class MersenneTwister MT;
Return to Programming and Technical Discussions
Users browsing this forum: No registered users and 53 guests